| I noticed on my Eunos one of the headlight covers is below the bonnet level when down..is there an adjustment to re level this...or is this probably due to a bonnet replacement at some stage? (12/99) |
|
This is normally caused by people leaning on the covers when working in the engine compartment, but I've noticed mine being out of line when only I have CAREFULLY worked on the car. The fix is easy. Open bonnet. Grab back edge of headlight lid and gently pull upwards. Close bonnet to check fit. Repeat as necessary. (12/99) |
| Would it not be a safer bet to pop up head lamps, remove plastic surround and then Adjust head lamp using the screws?. I don't like the thought of pulling the light unit up. Ok it may take 10 mins rather than 2 but in my book... (12/99) |
| I just figured that if they are down because of pushing then pulling will get them back in the right place! Also when you mention adjusting using the screws you need to be careful as the most tempting ones remove the headlamp and adjust the alignment! (12/99) |